DC-DC Adjustable Boost Converter 6A 10–32V to 12–35V Module

The DC-DC Adjustable Boost Converter 6 A (10–32 V to 12–35 V) Module is a step-up switching regulator designed to increase DC input voltage to a higher adjustable output voltage. It operates from a 10–32 V DC input and provides an adjustable 12–35 V DC output with current capability up to 6 A under appropriate operating conditions. Based on the UC3844 current-mode PWM controller architecture, the module offers stable voltage regulation, low no-load current consumption, and fast dynamic response. It is suitable for battery-powered systems, industrial electronics, LED power applications, and embedded DC power conversion projects. External protection and thermal management are recommended for high-current operation.

• UC3844 PWM Controller: Current-mode control architecture for stable voltage regulation
• Input Voltage Range: 10–32 V DC
• Output Voltage Adjustment: Adjustable 12–35 V DC via onboard potentiometer
• Output Current Capability: Up to 6 A maximum output current
• Input Current Capacity: Up to 10 A maximum input current
• Voltage Regulation Accuracy: ±0.5% line regulation and ±0.5% load regulation
• Dynamic Response: 200 µs response time with 5% transient deviation
• Output Ripple Performance: Maximum output ripple of 2% under rated conditions

• Module Type | DC-DC adjustable step-up (Boost) converter

• Controller IC | UC3844 current-mode PWM controller

• Input Voltage Range | 10–32 V DC

• Output Voltage Range | Adjustable 12–35 V DC

• Maximum Output Current | 6 A

• Maximum Input Current | 10 A

• Output Ripple | ≤ 2%

• Voltage Regulation | ±0.5%

• Load Regulation | ±0.5%

• Dynamic Response Time | 200 µs (5% transient deviation)

• No-Load Current Consumption | 25 mA (typical)

• Full-Load Operating Temperature | Approximately 45 °C

• Short-Circuit Protection | Not integrated; external fuse recommended

• Reverse Polarity Protection | Not integrated; external series diode recommended

• UC3844 Data Sheet