Bambu PLA Aero has almost the same filament density as regular PLA, while the prints density is only 50% to 80%. * When printing models of the same volume, PLA Aero is about half the weight of PLA Basic.
- Low Density and Light Weight
- Specialized for printing 3D RC planes
- Relatively tough with good impact resistance
- Easy to paint with matte texture
Controllable Model Density
Achieve lower density of the prints by increasing printing temperature and lowering flow rate. * The average density of prints will vary with changes in parameters such as actual printing temperature, flow rate ratio, printing speed, model size, wall thickness and infill density.
The relationship between the maximum foaming rate, minimum print density, and printing temperature of PLA Aero.
* Specimen Test: Nozzle Type: 0.4 mm; Printing Speed: 80 mm/s; Model size (L*W*H): 80*10*4 mm³ (the XY direction)
The actual required flow rate ratio and final model density may vary with different models.
| Printing Temperature |
Minimum Flow Rate Ratio |
Maximum Volumetric Expansion Ratio |
Maximum Foaming Rate |
Minimum Prints Density |
| 190 °C |
~ 0.95 |
~ 100% |
~ 0% |
~ 1.17 g/cm³ |
| 200 °C |
0.89 |
110% |
10% |
1.06 g/cm³ |
| 210 °C |
0.85 |
115% |
15% |
1.02 g/cm³ |
| 220 °C |
0.76 |
129% |
29% |
0.91 g/cm³ |
| 230 °C |
0.62 |
158% |
58% |
0.74 g/cm³ |
| 240 °C |
0.45 |
217% |
117% |
0.54 g/cm³ |
| 250 °C |
0.38 |
258% |
158% |
0.45 g/cm³ |
| 260 °C |
0.35 |
280% |
180% |
0.42 g/cm³ |
| 270 °C |
0.37 |
265% |
165% |
0.44 g/cm³ |
