Reinforced with Carbon Fiber for Superior Strength
PETG-CF combines the durability of PETG with the rigidity of carbon fiber, delivering exceptional mechanical performance for parts that need to work as hard as they look.
Print Flawlessly with Minimal Tuning
PETG-CF's specially formulated blend minimizes the risk of warping and nozzle sticking, addressing the clumping and stringing issues common to traditional PETG. The result is clean, consistent prints without extensive parameter fine-tuning.
Sleek, Textured Finish
Carbon fiber gives PETG-CF a distinctive texture that conceals layer lines, while its surface retains a glossy finish shinier than PLA-CF's matte look for prints that are as attractive as they are functional.
Built for Performance
Carbon fiber reinforcement significantly boosts the stiffness of standard PETG while enhancing both strength and toughness, making it an all-rounder among basic filaments. It's ideal for load-bearing and functional parts, drone components, racing models, and applications where impact strength and a sleek appearance both matter.
Ready for Outdoor Use
Thanks to its enhanced resistance to heat and moisture, Bambu PETG-CF is ideal for outdoor applications. Feel free to create durable tools for your garden or any outdoor environment.
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.
Good to Know Before You Print
PETG-CF is a carbon fiber filament, so it's abrasive, use a hardened steel nozzle (0.4mm, 0.6mm, or 0.8mm) rather than a stainless steel or 0.2mm nozzle to avoid excess wear. It's also moisture-sensitive and should be dried before use (65°C for 8 hours) and stored in a dry environment. Note: not compatible with AMS lite.
