Bambu ABS-GF Filament 1KG - Black

  • Sale
  • Regular price 119 QAR
Product ID: VT-4951
This product is available.

🔥 Print more, pay less!
🎯 3-4 rolls → save 5 QAR per roll
🚀 5-24 rolls → save 10 QAR per roll
💎 25+ rolls → save 15 QAR per roll
Discount is applied automatically in your cart.

We do not currently have an estimate for arrival date. Contact us for urgent custom order!

Bambu ABS-GF is a glass fiber reinforced ABS filament built for parts that need to stay strong, stiff, and true to size. The added glass fiber lifts its strength and stiffness above regular ABS, which suits it to load-bearing parts and parts that must resist bending. Temperature resistance and dimensional stability also improve over standard ABS, and prints are less likely to warp or deform. 

Beyond its mechanical upgrade, Bambu ABS-GF prints with a fine matte surface that hides layer lines and gives parts a clean, finished look. Its durability and water resistance make it a good fit for long-lasting production and household items such as mechanical casings, connectors, and molds.

  • Enhanced Strength and Stiffness
  • Greater Dimensional Stability
  • Fine Matte Finish
  • Durable and Water Resistant
  • Comes with High Temperature Reusable Spool
  • Diameter: 1.75mm +/- 0.03mm

Cautions for Use

  • [AMS 2 Pro, AMS HT &] AMS Compatible
  • AMS lite NOT Compatible
  • Enclosure Printers Required
  • Not for use with 0.2 mm nozzles
  • Dry Out Before Use

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).
Load and print! No more tedious setting steps.

Compatibility

  • Build plate: Smooth PEI Plate, Textured PEI Plate
  • Hotend: Hardened Steel Nozzle, 0.4 / 0.6 / 0.8 mm recommended

Printing tips

  • Like regular ABS, this filament can give off pungent, unpleasant odors while printing, so keep the printer in a well-ventilated area and print enclosed.
  • Drying conditions: 80℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.
  • Recommended settings: nozzle temperature 240 - 270℃, heatbed temperature 80 - 100℃.
  • ABS-GF warps less than regular ABS, but large and/or high infill density models can still warp. To avoid this: 1) Use an enclosed printer and make sure the build plate is properly glued before printing. 2) Set a lower printing speed and a higher heatbed temperature. For more details please refer to: Common print quality problems and solutions on WIKI.
  • Glass fiber is abrasive. Use a hardened steel nozzle to avoid nozzle wear.
  • The refill filament needs to be used with a spool. For detailed instructions on how to swap in the new filament using the Bambu Reusable Spool, please refer to the guide on WIKI.
Let's help you ! خلينا نساعدك
Hello there! 👋 How can we help you today?
هلا والله! كيف ممكن نساعدك؟
Contact us تواصل معنا