Raspberry Pi Pico Wireless Microcontroller Board – RP2040

The Raspberry Pi Pico W is a wireless-enabled microcontroller development board based on the RP2040 platform. It integrates 2.4 GHz IEEE 802.11 b/g/n Wi-Fi connectivity, extending the Pico family for networked embedded applications. The board is powered by the RP2040 dual-core ARM Cortex-M0+ processor running at up to 133 MHz, with 256 KB SRAM and 2 MB onboard QSPI Flash memory. Wireless connectivity is provided by the Infineon CYW43439 controller, with WLAN support available at launch. Suitable for IoT prototypes, remote sensing, wireless control systems, and embedded development projects.

• RP2040 dual-core ARM Cortex-M0+ microcontroller
• Clock frequency up to 133 MHz
  
• 2.4 GHz IEEE 802.11 b/g/n Wi-Fi connectivity
  
• Infineon CYW43439 wireless controller
  
• 256 kB on-chip SRAM and 2 MB Flash
  
• 30 multifunction GPIO pins
  
• USB 1.1 device interface
  
• Compact board layout for embedded integration
• Onboard antenna for Wi-Fi connectivity
  
• Secure boot support via RP2040 ROM
  
• Hardware watchdog timer
  
• DMA controller for peripheral data transfer
  
• Multiple power input options
  
• 3.3 V regulated output pin
•  Support for C and MicroPython programming
  
• Real-time interrupt handling
  
• Small form factor for space-constrained designs
  
• Educational and industrial deployment suitability

• CPU Architecture: ARMv6-M
  
• Core Count: 2 cores
  
• Instruction Set: Thumb
  
• PIO Units: 8 programmable state machines
  
• DMA Channels: 12 independent channels
  
• PWM Slices: 8 PWM slices
  
• PWM Outputs: 16 channels
  
• ADC Resolution: 12-bit
  
• ADC Inputs: 3 channels
  
• Temperature Sensor: On-chip
  
• Watchdog Timer: Hardware watchdog supported
  
• Debug Interface: Serial Wire Debug (SWD)
  
• Boot Mode: USB BOOTSEL
  
• Power Regulation: Onboard SMPS
  
• Wi-Fi Antenna: Integrated PCB antenna
  
• Wi-Fi Security: WPA2-PSK support
  
• Bluetooth Hardware: Bluetooth 5.2 capable
  
• Bluetooth Support: Not enabled in software
  
• Board Dimensions: 51 × 21 mm
• Mounting Type: Through-hole and castellated SMD

• Getting Started Guide
• RP2040 Informational Page
• Raspberry Pi Pico W 3D Model
• Raspberry Pi Pico W 3D Case
• raspberry pi pico W micropython uf2

• Voltaat Learn -  Raspberry Pi Pico Tutorials
• Voltaat Youtube Channel