TL072CP JFET Input Operational Amplifier IC

The Texas Instruments TL072CP is a dual JFET input operational amplifier designed for low noise and high input impedance applications.
It provides stable analog performance with low input bias current and low harmonic distortion.
The device supports a typical gain bandwidth of 3 MHz and a slew rate of approximately 13 V/µs.
It operates from dual power supplies commonly set between ±5 V and ±18 V.
Typical applications include audio amplification, signal conditioning, active filters, and instrumentation circuits.

• Dual JFET Input Stages for high input impedance

• Low Input Bias Current suitable for high-impedance sources

• Low Noise Performance for audio and instrumentation use

• High Slew Rate of approximately 13 V/µs

• Gain Bandwidth Product of approximately 3 MHz

• Low Harmonic Distortion under typical operating conditions

• Dual Supply Operation supporting ±5 V to ±18 V

• Model | TL072CP

• Device Type | Dual JFET Input Operational Amplifier

• Number of Channels | 2

• Recommended Supply Voltage | ±15 V

• Operating Supply Voltage Range | ±5 V to ±18 V

• Gain Bandwidth Product | Approximately 3 MHz

• Slew Rate | Approximately 13 V/µs

• Input Offset Voltage (Typical) | 3 mV

• Input Bias Current (Typical) | 65 pA

• Operating Temperature Range | 0 °C to 70 °C

• Package Type | 8-Pin Dual In-Line Package (DIP-8)

• Datasheet

• The Ultimate Guide to TL072 Op Amp

• Build TL072CP Circuit On Breadboard