Dual Digital Voltmeter Ammeter (100V/10A DC)

Part ID: VT-1970
  • Sale
  • Regular price 25 QAR

This is a small volt and current meter that you can connect to your power source and device/load to keep an eye about the status of your device. 

The voltage between the thin red and thin black lines must be within DC 4.5-30V
The ammeter can only be connected to the negative of the device under test
10A below ammeter (include 10A), built-in shunt, does not require external shunt
When the black thin line vacant, it is better to use insulating tape around the exposed part of the wire, to prevent short circuits
If just be used as a voltmeter, it is recommended that the yellow line and the black line were connected together, to prevent the ammeter digital flashing


  • Operating voltage:DC 4.5 - 30V
  • Measure voltage: DC 0 - 100V
  • Minimum resolution(V): 0.1V
  • Measure current :10A (measure directly,built-in shunt)
  • Minimum resolution(A): 0.01A
  • Operating current: <20mA Display color: Red and Blue (two-color display)
  • Dimensions: 48 x 29 x 21mm
  • Mounting cutout: 45.5 x 26.5mm
  • Refresh rate: about 500mS / times
  • Measure accuracy: 1% (± 1 digit)
  • Operating temperature: -10 to 65° c
  • Operating Humidity: 10 to 80% (non-condensing)
  • Display: 0.28" LED digital. Two color blue and red