Two nozzles. Zero compromise.
The H2D Pro Combo runs two fully independent nozzles side by side, so multi-material and multi-color parts print in a single pass — dedicate one nozzle to support material, the other to your model, and get a clean interface without the purge waste of a single-nozzle swap system.
Built for the shop floor, not just the desk
This is the enterprise edition of the H2D platform. A dedicated Ethernet port keeps the connection stable in crowded network environments, WPA2-Enterprise authentication (EAP-PEAP, EAP-TLS, EAP-TTLS) meets IT security requirements, and physical kill switches for Wi-Fi and Ethernet give you a hard cutoff when you need one. Fleet management integration is available for teams running more than one machine.
Precision you can measure
A standard-fit vision encoder plate uses 5 µm optical measurement to calibrate toolhead movement, holding 50 µm motion accuracy anywhere in the build volume — regardless of distance traveled. Paired with 1000 mm/s toolhead speeds and 20,000 mm/s² acceleration, the H2D Pro moves fast without giving up accuracy.
Engineered for high-temperature materials
A tungsten carbide nozzle (HRA 90 vs. 74 for hardened steel) lasts roughly 50% longer when printing abrasive fiber-reinforced filament. The hotend reaches 350 °C, the bed 120 °C, and an actively heated 65 °C chamber with adaptive airflow keeps temperature-sensitive materials from warping or clogging. A dedicated toolhead cooling fan lets the machine run 3 °C hotter than standard while staying reliable.
Clean air, less mess
A G3 pre-filter, H12 HEPA filter, and activated carbon filter pull particulates and VOCs out of the exhaust — useful in shared or poorly ventilated spaces.
Watches itself so you don't have to
Three 1080p cameras (live view, nozzle, and toolhead) stream to Bambu Studio, while door, filament runout, and filament tangle sensors catch problems before they ruin a print.
Ready for serious volume
The Combo bundle adds AMS 2 Pro and AMS HT, so you can run high volumes of standard filament alongside high-temperature engineering materials in the same job, with active drying on both units.
Grows with your workflow
The Pro Combo ships as a pure FDM machine — no laser or blade-cutting module included — but it supports the same laser and cutting upgrade path as the standard H2D, so engraving and digital cutting can be added later if your workflow needs it.
