Placeholder Flame Sensor – Voltaat

Flame Sensor

  • Sale
  • Regular price 9 QAR
  • Product ID: VT-1201
    30+ in stock

    Doing a fire detector robot? Or maybe smart system which require flame detection? This ready sensor module should be suitable for you. The flame sensor module comes with  flame sensor, adjustable digital filter for digital output and it also reserve the original analog output. So you can choose to interface it to your favourite either as digital input or analog input sensor. Minimum 3 wires interface, of course you can always use 4 wires and uses both digital and analog.

    The flame sensor can be used to detect fire or other light source with wavelength of 760 nm ~ 1100 nm light. In the fire-fighting robot game, the flame plays an important role in the probe, which can be used as the robot's eyes to find fire source or football with special light source. It can make use of fire-fighting robots, soccer robots.

    Flame sensor probe angle of 60 degrees, the special sensitivity of the flame spectrum, a M3 mounting holes to ease the mounting of module to your robot.

    The flame sensor's operating temperature is -25 degrees Celsius to 85 degrees Celsius, in the course of the flame it should be noted that the probe distance from the flame should not be too close inorder to avoid damage. It can be interface with any microcontroller with digital or analog input.

    • Detect fire, detect light source and sensitive to light with wavelenghth of 940nm 
    • Interface:Analog or digital
    • Supply Voltage: +5 V
    • Detection range: 20cm (1V) ~ 100cm (4.8V)