Placeholder eSun Green ePLA Lite Filament - 1 KG - 1.75 mm – Voltaat
Voltaat 3DP_Filaments eSun Green ePLA Lite Filament - 1 KG - 1.75 mm
Voltaat 3DP_Filaments eSun Green ePLA Lite Filament - 1 KG - 1.75 mm
Voltaat 3DP_Filaments eSun Green ePLA Lite Filament - 1 KG - 1.75 mm
Voltaat 3DP_Filaments eSun Green ePLA Lite Filament - 1 KG - 1.75 mm
Voltaat 3DP_Filaments eSun Green ePLA Lite Filament - 1 KG - 1.75 mm

eSun Green ePLA Lite Filament - 1 KG - 1.75 mm

  • Sale
  • 125 QAR
  • Product ID: VT-1994
    8 in stock

    Through the modification of PLA, ePLA-Lite not only maintains the characteristics of easy printing of PLA filament, but also improves the printing performance and physical strength on the original basis.

    3D PRINTING FILAMENT ePLA-Lite
    Density(g/cm3)  1.23
    Heat Distortion Temp(℃,0.45MPa)  53
    5/10
    Melt Flow Index(g/10min) 5.7（190℃/2.16kg）
    Tensile Strength(MPa) 61.34
    7/10
    Elongation at Break(%) 29.92
    3/10
    Flexural Strength(MPa) 100.27
    10/10
    Flexural Modulus(MPa) 3824
    7/10
    IZOD Impact Strength(kJ/㎡) 6.3
    2/10
    Durability 4/10
    Printability 9/10
    Recommended printing parameters
    Extruder Temperature(℃) 190 – 230℃Recommended temperature：215℃
    Bed temperature(℃) 45 – 60°C
    Fan Speed 100%
    Printing Speed 40 – 100mm/s
    Heated Bed Optional
    Recommended Build Surfaces Masking paper, PVP solid glue, PEI