Usage Method：
1.Clamp the platform to the printer's hotbed.
2.Place the A4 paper on the platform for leveling, and the distance between the nozzle and the platform keeps the A4 paper moving freely
3.Clean the platform surface with water (If there is sweat or oil on the platform, which will lead to stickiness.), Suggested bed temperature may vary depends on the filament material.
4.After finish printing, the viscosity of the platform will gradually decrease as the temperature decreases, and the model can be taken after the temperature of the platform is lowered.
PLEASE NOTE: This surface is incredibly sticky at high temperatures for plastics such as PETG, PLA, and ABS. Once the print has finished, DO NOT immediately try to remove the model from the glass bed with force!! This glass bed must come down to room temperature for the advanced surface to "release" the model. Attempting to forcibly remove the print from the glass bed at high temperature WILL DAMAGE the proprietary surface.
Temperature settings for different filaments:
1. PLA:50-70℃
2. Flexible filament: 50-70℃
3. ABS:100-125℃ (110℃ is recommended)
4. PC:100-130℃ (120℃ is recommended)
5. Nylon:90-120℃ (110℃ is recommended)
6. PP:100-130℃ (120℃ is recommended)
7. PETG: 50-70℃