- Questions & Answers
The Creality Ender 3 S1 is an innovative FDM printer with numerous features, which has preset interfaces for LED light and laser engraving.
"Sprite" direct dual gear extruder for high filament compatibility
The "Sprite" direct dual gear extruder developed by Creality has two chrome steel gears that are switched with a gear ratio of 1: 3.5. With a force of up to 80N, the extruder achieves a smooth and even feed and extrusion of filaments without slipping and is ideal for printing flexible filaments such as TPU. With a weight of only 210g, the "Sprite" is lighter than other direct extruders and is characterized by lower inertia and more precise positioning.
CR-Touch automatic leveling
The CR-Touch 16-point automatic bed-leveling technology saves you from the effort of manual leveling. The intelligent leveling system automatically compensates for the print height of various points on the heated bed.
High-precision dual Z-axis for higher printing precision
With a dual Z-axis leadscrew & Z-axis dual-motor design, the Ender 3 S1 works smoother and more in sync, reducing lines and edges on the sides of your print to improve print quality.
Removable print surface made of PC spring steel
The innovative printing platform is a combination of a PC coating, a spring steel plate and a magnetic plate that immediately adheres to the surface when it is detached. The PC coating ensures good adhesion and easy removal of the printed models by bending the surface.
Ultra-quiet 32-bit motherboard
The brand new 32-bit silent motherboard runs at low decibel levels (below 50dB) and significantly reduces noise, so you can enjoy 3D printing.
Convenient operation & new user interface
The 4.3 inch LCD button screen has a brand new user interface for easy interaction. When inactive, the screen is automatically dimmed for 5 minutes to save energy and protect the environment.
Resume printing function and filament sensor
The Ender 3 S1 has the function to detect filament running out or breakage / loss of performance and to continue printing after restoration. By accurately recording the print data at the time of a power failure / filament run-out or break, filament and time can be saved.
Pre-assembled 3D printer - Easy assembly in 6 steps
96% of the printer housing is pre-installed, making it easy to assemble in just 6 steps and allowing easy and straightforward maintenance of the printer.
Existing interface for laser engraving and LED light
With preset interfaces for laser engraving and LED light, the Ender 3 S1 offers you more options.
Note: Laser engraving and LED light must be purchased separately.
Belt tensioner with button
The belt tensioner is an easy-to-use tool that prevents problems such as layer shifting due to insufficient strength.
- 220 x 220 x 270 mm print bed
- “Sprite” direct-drive dual-gear extruder
- 150mm/s max print speed
- 0.4mm nozzle
- 0.1mm accuracy
- 0.05-0.35mm layer thickness
- 1.75mm filament
- 260C max nozzle temperature
- 100C max heat bed temperature
- CR Touch automatic bed leveling
- High-precision dual Z-axis
- 32-bit silent mainboard
- Supports PLA/TPU/PETG/ABS filaments
- Filament runout sensor w/ resume printing capability
- Quick Assembling
- PC spring steel print sheet
- 4.3-inch LCD screen with knob control